ProDetailing R1 – Rims 50ml Ceramic Coating

Nano-ceramic coating for rims. Dedicated for chrome, aluminum and paint-coated rims.

Super hydrophobic effect and protection from water, dust, salt and UV-rays. Increased protection against scratches. Extra hard ceramic self-cleaning rims’ protection. It is also resistant to high temperatures created during braking. The fastest way for permanent protection of every kind of rims: both painted and polished. It gives a superb hydrophobic effect that lasts for months. How to apply the product: 1 Shake bottle well before use and wait 3 minutes before opening. 2 Wrap small cloth around soft-side of the applicator. 3 Apply few drops of R1 onto applicator covered with small cloth. 4 Apply thin and even layer onto rim. 5 Leave the layer on the surface for approx. 7-8 minutes (bonding time). 6 Buff the surface with microfiber towel to a high gloss. 7 Move to next paintwork section. Attention: Do not apply R1 to hot surfaces or in direct sunlight. It is good to know that: If you want to know if the product is ready to buff, first try to move a hanging towel over drying coating. If the towel slides easily then wait a few minutes until the surface will start to slow it down. For best results put up to 3 layers of the product with minimum time interval of 3 hours. What you need to know: 1 Use thin rubber protective gloves. 2 Apply indoor only with temperature of 18-24 C. 3 Make sure the surface is clean and cool. 4 Degrease and remove old coatings from the glass before application. 5 Apply additional layers with minimum time interval of 3 hours. 6 Drying time after application of last layer - 8 hours. 7 Do not expose the car to water for 24 hours after coating.